Valencia Decorative Round Fiberglass Planter - Graceful Form for Indoor and Outdoor Design

The Valencia is a decorative round fiberglass planter built around a tapered curved silhouette — sculptural, lightweight, and at home in both residential and commercial interiors and exteriors. Three sizes from 15" dia.× 18" H up to 27" dia.× 31" H, sized for accent plants, statement floor plants, and small indoor trees. The tapered base and curved body soften hard architecture and add height where flat-sided planters would feel boxy. 20 standard colors, each available in Low Gloss or High Gloss — 40 finish options total. Custom color matching available to any Pantone or RAL reference. PPM QuickShip in 1–2 weeks on standard finishes, backed by a 3-year limited warranty.

Browse related categories: Round Planters · Tall Planters · Indoor Planters · Outdoor Planters · Fiberglass Planters · Decorative Planters · Commercial Planters

• Specified by designers, hospitality groups, and luxury residential projects for entryways, lobbies, sunrooms, and patios where a sculptural round form does more for the space than a straight cylinder.
• Hand-laid commercial-grade fiberglass. UV-stable and frost-resistant. Holds up in desert sun, coastal salt air, and freeze-thaw climates for decades. Lightweight relative to ceramic, stone, or concrete — the 27" Valencia weighs about 23 lb empty.
• Three sizes, from a 15"×18" tabletop or accent piece up to a 27"×31" floor planter for indoor trees and statement outdoor plantings.
• Tapered curved silhouette with a narrower base than top — reads as sculpted rather than utilitarian, and works particularly well in pairs flanking a doorway or grouped as a stepped trio.
• Custom color match available to any Pantone or RAL code. A small per-color fee covers the matching process plus any spray-out approvals, in either Low Gloss or High Gloss — your choice.
• Optional pre-drilled drainage holes at no extra cost. Pick "no drainage" for indoor use or "pre-drilled" for outdoor.
• Standard nursery grow pot fit: Valencia's tapered round interior accommodates a single grow pot sized to the bottom dimension (ANSI Z60.1) — useful for swap-in seasonal planting and easy maintenance rotations. See the size table below.
• Specification documentation: spec sheet PDF with dimensions, weights, and finish options. Expanded CAD and BIM files are in development.

Sizes & Pricing

Finished to order in our US facility. Commercial-grade build. 3-year limited warranty.

Soil capacity shown is conservative — rounded up so a buyer ordering by our number always has enough. It reflects ~90% of full interior volume to leave room for a drainage layer and ~1" below the rim. Note: potting soil settles 10–15% after watering — order a little extra if you intend to fill to the rim. Filled weights assume saturated potting soil at ~10 lb/gal for load planning; actual weights vary with media density, moisture, and root ball. Bottom Dia is the outside diameter at the base — useful for sizing tray protection, base saucers, or planning narrow base clearance on stepped landings. Grow pot fit follows ANSI Z60.1 nursery-stock standards; the bottom interior is the binding constraint on a tapered form. Brand variance is typical — verify the specific container before order if it matters.

Ships in 1–2 weeks for any of our 40 standard finishes and custom color matches under PPM QuickShip. Spray-out samples and custom shapes run longer; details are in the Design Guidance tab.

Prices shown are standard retail. (Trade accounts are available) They include any of our 20 standard colors in Low Gloss or High Gloss (40 finish options). Custom color matching is available with a small per-color fee that covers the full matching process, including physical spray-out samples for approval before production. The fee covers the color in both gloss levels. Pre-drilled drainage holes are free if you need them.

Materials & Construction

• Material: hand-laid commercial-grade fiberglass with a reinforced base. The 27" Valencia weighs about 23 lb empty; an equivalent ceramic or concrete planter at the same scale runs well over a hundred pounds, so one person can move and place a Valencia without equipment.
• Finish: multi-coat automotive-grade paint, hand-applied and clear-coated. UV-stable, frost-resistant, and rated for desert sun, coastal salt air, and freeze-thaw climates.
• Color range: 20 standard colors, each available in Low Gloss or High Gloss for 40 total finish options. Custom color matching to any Pantone or RAL code is available for a small per-color fee, covering both gloss levels. Works equally well for hotel brand standards, architectural specs, and matching residential trim. For brand colors held in other systems, convert to the nearest Pantone or RAL equivalent for the most accurate result.
• Construction: seamless one-piece round body with a tapered base. No seams or joints to fail, crack, or leak.
• Origin: a Jay Scotts silhouette — made and finished in the US by Pots Planters & More. We stock the base inventory in our US facility and finish each order to your color specification.
• Warranty: 3-year limited warranty against material and finish defects. Full warranty terms.

Decorative Round Fiberglass Planter for Lobbies, Patios, and Entries

The Valencia is a decorative round fiberglass planter built for hotel lobbies, restaurant interiors, office entries, residential foyers, and patios and rooftop terraces. Three sizes cover the most-specified placements: the 15"×18" works as a tabletop or console accent and a small floor pot in tight rooms; the 20"×23" frames French doors, hospitality entries, and sunroom corners with mid-size floor plants; and the 27"×31" is the lobby and indoor-tree size — fiddle-leaf fig, ficus lyrata, young olive or citrus, and bamboo palms read at distance from upper floors. The defining detail is the curved, tapered silhouette — wider through the middle than at the base — which reads as a sculptural object rather than a strictly utilitarian planter, and the seamless one-piece commercial-grade fiberglass body weighs a fraction of an equivalent ceramic or concrete planter at the same scale. Built for indoor use with a "no drainage" pick paired with a saucer or basin, or for year-round outdoor use with the pre-drilled drainage option; both are free at order.

Project Planning Notes

• Plant sizing: the 15" works as a tabletop or floor accent for ZZ plant, snake plant, peace lily, or rubber tree. The 20" suits monstera, dwarf citrus, mid-size fiddle-leaf, and other floor plants needing a sculptural pedestal. The 27" anchors fiddle-leaf fig, ficus lyrata, young olive or citrus trees, bamboo palms, and similar mid-scale indoor trees. Match planting opening to root ball plus space for backfill and irrigation.
• Filled weight (load planning): see the Filled (est.) column in the size table above. Estimates use saturated potting soil at ~10 lb/gal for conservative load planning; the 27" lands near 547 lb filled. For rooftop terraces, elevated decks, balconies, and interior office floors, confirm load capacity with your structural engineer or building manager before placement if you're installing multiple large units.
• Drainage decision: indoor use is typically "no drainage" with a saucer or basin under the root ball. Outdoor use should be "pre-drilled" to prevent water from pooling, freezing, or causing root rot. Both options are free; pick at order.
• Base footprint and placement: the tapered round form has a notably narrower base than top — the 27"×31" sits on a 13.5" base footprint. See the Bottom Dia column in the size table for actual base footprint — useful for sizing protective trays or saucers and confirming clearance against railings, columns, and stair edges.
• Round-form design uses: in pairs at an entry, the round form softens hard architecture and frames a doorway. In a single placement, it adds a sculptural moment to a corner, foyer, or reading nook. In a stepped trio at mixed sizes, it builds rhythm in lobbies and patios. Odd-number groupings (3 or 5) read as deliberately composed.
• Custom color workflow: send us your Pantone or RAL code. We mix the match and produce physical spray-out samples for your approval. Once approved, production begins. Add roughly one week to standard lead time for the spray-out and approval cycle. A small per-color fee applies and covers all spray-outs needed to lock the match — the fee covers both Low Gloss and High Gloss versions of that color. If your brand color lives in another system, convert to the nearest Pantone or RAL equivalent before submitting; cross-system conversions from house-paint references are typically only 80% accurate and add significant time to the approval cycle.
• Lead time caveats: standard finishes ship in 1–2 weeks under our PPM QuickShip program. Custom Pantone or RAL color matches add about 1 week. Fully custom shapes and sizes are built to order on a project timeline we confirm with you at order. Bulk project orders (25+ units) ship on a confirmed schedule we set at order. We confirm exact dates in writing before you commit.
• Multi-unit finish consistency: for runs of 4+ units, request finish-consistency confirmation before production. Single-batch production keeps color, sheen, and texture matched across the order.

For Designers & Project Teams

The Valencia is in regular rotation for hospitality, restaurant, hotel entry, and luxury residential projects across the country. Because we finish every order in our US facility, lead times stay short and color flexibility stays open.

• US-stocked, finished to your color order. 1–2 weeks for any standard finish under our PPM QuickShip program; add about 1 week for a custom Pantone or RAL color match.
• Color matching for branded environments. Match a hotel brand standard, restaurant interior palette, or architectural specification using any Pantone or RAL code. A small per-color fee covers the match and spray-out approvals.
• Trade pricing for designers, architects, landscape professionals, and hospitality procurement teams across our full collection. Apply for a trade account.
• Specification documentation: Valencia spec sheet PDF with dimensions, weights, planting openings, capacity, and finish options for project submittals. Expanded CAD and BIM files are in development.
• Freight delivery options: FedEx Freight Direct curbside (with liftgate and appointment) on $500+ orders, White Glove placement available, and orders over $3,500 include curbside shipping & handling at no additional cost. Full rate schedule is in the Shipping & Delivery tab.
• Returns: 30 days from delivery on standard-color items in original condition. Custom color match orders are made to your specification and aren't returnable. We confirm this in writing at time of quote so there are no surprises at delivery.
• Dedicated support: a project team from initial quote through delivery, not a contact form queue.

Trade Buyers Usually Ask

Colors may render differently on screen than in person. For final color decisions, request a physical sample — recommended for commercial multi-unit orders.