Tolga Long Rectangular Fiberglass Planter – Streamlined Design for Contemporary Spaces

The Tolga is a long, straight-sided rectangular fiberglass planter built for lobbies, restaurant fronts, rooftop terraces, and any architectural setting that needs a clean horizontal line. Five lengths from 24" up to 72", all 16"×24" in cross-section — consistent width and height across the size run so a row of Tolgas reads as a single continuous boundary. Finished by hand in our US facility. 20 standard colors, each available in Low Gloss or High Gloss — 40 finish options total. Custom color matching available to any Pantone or RAL reference. PPM QuickShip in 1–2 weeks on standard finishes, backed by a 3-year limited warranty.

Browse related categories: Planter Boxes · Long Planters · Rectangular Planters · Outdoor Planters · Fiberglass Planters · Balcony Planters · Commercial Planters

• The long rectangular profile in regular rotation for hospitality lobbies, restaurant fronts, rooftop terraces, and interior-designer projects across the US.
• Hand-laid commercial-grade fiberglass. UV-stable and frost-resistant. The 48" Tolga weighs about 46 lb empty — a two-person lift; the 60" and 72" sizes typically place with a small dolly or two people.
• Five lengths that scale cleanly, all sharing the same 16" width and 24" height. Line them up end-to-end for a continuous boundary, or mix lengths for rhythm.
• Custom color match available to any Pantone or RAL code. A small per-color fee covers the matching process plus any spray-out approvals, in either Low Gloss or High Gloss — your choice.
• Optional pre-drilled drainage holes at no extra cost. Pick "no drainage" for indoor use or "pre-drilled" for outdoor.
• Standard nursery grow pot fit: Tolga's rectangular interior accommodates multiple standard grow pots in a row (ANSI Z60.1) — useful for swap-in seasonal planting and commercial maintenance rotations. See the size table below.
• Specification documentation: spec sheet PDF with dimensions, weights, and finish options. Expanded CAD and BIM files are in development.

Sizes & Pricing

Finished to order in our US facility. Commercial-grade build. 3-year limited warranty.

Soil capacity shown is conservative — rounded up so a buyer ordering by our number always has enough. It reflects ~90% of full interior volume to leave room for a drainage layer and ~1" below the rim. Note: potting soil settles 10–15% after watering — order a little extra if you intend to fill to the rim. Filled weights assume saturated potting soil at ~10 lb/gal for load planning; actual weights vary with media density, moisture, and root ball. Grow pot fit follows ANSI Z60.1 nursery-stock standards with snug end-to-end placement; #3 (11" dia) and #5 (10.75" dia) both fit within the 13.4" inner width. Brand variance is typical — verify the specific container before order if it matters.

Ships in 1–2 weeks for any of our 40 standard finishes and custom color matches under PPM QuickShip. Spray-out samples and custom shapes run longer; details are in the Design Guidance tab.

Prices shown are standard retail. (Trade accounts are available) They include any of our 20 standard colors in Low Gloss or High Gloss (40 finish options). Custom color matching is available with a small per-color fee that covers the full matching process, including physical spray-out samples for approval before production. The fee covers the color in both gloss levels. Pre-drilled drainage holes are free if you need them.

Materials & Construction

• Material: hand-laid commercial-grade fiberglass with a reinforced base. The 48" Tolga weighs about 46 lb empty; the 72" weighs about 59 lb. An equivalent concrete or stone rectangular planter at that scale would run several times heavier and risk cracking. Fiberglass moves and places without equipment.
• Finish: multi-coat automotive-grade paint, hand-applied and clear-coated. UV-stable, frost-resistant, and rated for desert sun, coastal salt air, and freeze-thaw climates.
• Color range: 20 standard colors, each available in Low Gloss or High Gloss for 40 total finish options. Custom color matching to any Pantone or RAL code is available for a small per-color fee, covering both gloss levels. Works equally well for hotel brand standards, architectural specs, and matching residential trim. For brand colors held in other systems, convert to the nearest Pantone or RAL equivalent for the most accurate result.
• Construction: seamless one-piece body. No corner joints to fail, crack, or leak.
• Origin: a Jay Scotts silhouette, US-finished by Pots Planters & More. We stock the base inventory in our facility and finish each order to your color specification.
• Warranty: 3-year limited warranty against material and finish defects. Full warranty terms.

Long Rectangular Planter Box for Boundaries, Dividers, and Patio Edges

The Tolga is a long, low-profile rectangular planter box built for projects that need a clean horizontal line. The five sizes (24", 36", 48", 60", 72") all share the same 16" width and 24" height, so a row of Tolgas reads as one continuous architectural element — ideal for restaurant patio edges, hotel courtyard dividers, rooftop terrace borders, and office reception lanes. The seamless one-piece body has no corner joints to fail in freeze-thaw cycles, and the commercial-grade fiberglass weighs a fraction of what an equivalent concrete or stone box would weigh at that scale. For larger commercial layouts, see our full outdoor planter collection.

Project Planning Notes

• Filled weight (load planning): see the Filled (est.) column in the size table above. Estimates use saturated potting soil at ~10 lb/gal for conservative load planning; the 60" lands near 756 lb filled and the 72" near 907 lb. For rooftop terraces, balconies, elevated patios, and interior office floors, confirm load capacity with your structural engineer or building manager — rectangular planters at 60"+ are a common point where load review is appropriate.
• Linear coverage: all five sizes share the same 16" width and 24" height. A row of three 60" Tolgas covers 15 linear feet of continuous green boundary; a row of three 72" covers 18 feet. Mix lengths for rhythm or run a single length end-to-end for a clean architectural line.
• Drainage decision: indoor use is typically "no drainage" with a liner or basin under the root ball. Outdoor use should be "pre-drilled" to prevent freeze damage and root rot. Both options are free; pick at order.
• Wind exposure: the rectangular profile presents a long face in wind. On rooftops, coastal patios, and exposed streetscapes, weight the base with gravel or sand, or anchor per project conditions — particularly for the 60" and 72". Talk to our team if you need site-specific guidance.
• Custom color workflow: send us your Pantone or RAL code. We mix the match and produce physical spray-out samples for your approval. Once approved, production begins. Add roughly one week to standard lead time for the spray-out and approval cycle. A small per-color fee applies and covers all spray-outs needed to lock the match — the fee covers both Low Gloss and High Gloss versions of that color. If your brand color lives in another system, convert to the nearest Pantone or RAL equivalent before submitting; cross-system conversions from house-paint references are typically only 80% accurate and add significant time to the approval cycle.
• Lead time caveats: standard finishes ship in 1–2 weeks under our PPM QuickShip program. Custom Pantone or RAL color matches add about 1 week for the spray-out and approval cycle. Fully custom shapes and sizes are built to order on a project timeline we confirm with you at order. Bulk project orders (25+ units) ship on a confirmed schedule we set at order. We confirm exact dates in writing before you commit.

For Designers & Project Teams

The Tolga is specified across hospitality, restaurant, office, rooftop terrace, and commercial projects. Because we finish every order in our US facility, lead times stay short and color flexibility stays open.

• US-stocked, finished to your color order. 1–2 weeks for any standard finish under our PPM QuickShip program; add about 1 week for a custom Pantone or RAL color match.
• Color matching for branded environments. Match a hotel brand standard, restaurant interior palette, residential trim, or architectural specification using any Pantone or RAL code. A small per-color fee covers the match and spray-out approvals.
• Continuous-boundary specifying: matching cross-section across all five lengths means a row of Tolgas reads as one continuous architectural element. Common pattern for restaurant patio dividers, rooftop terrace edges, and office wayfinding.
• Trade pricing for designers, architects, landscape professionals, and hospitality procurement teams across our full collection. Apply for a trade account.
• Specification documentation: Tolga spec sheet PDF with dimensions, weights, planting openings, capacity, and finish options for project submittals. Expanded CAD and BIM files are in development.
• Freight delivery options: FedEx Freight Direct curbside (with liftgate and appointment) on $500+ orders, White Glove placement available, and orders over $3,500 include curbside shipping & handling at no additional cost. Full rate schedule is in the Shipping & Delivery tab.
• Returns: 30 days from delivery on standard-color items in original condition. Custom color match orders are made to your specification and aren't returnable. We confirm this in writing at time of quote so there are no surprises at delivery.
• Dedicated support: a project team from initial quote through delivery, not a contact form queue.

Trade Buyers Usually Ask

Colors may render differently on screen than in person. For final color decisions, request a physical sample.