St. Tropez Tall Vase Fiberglass Planter - Graceful Tapered Design for Classic and Modern Interiors

The Saint Tropez is a tall vase-form fiberglass planter with a gently tapered silhouette that reads equally at home in a hotel lobby or a residential entry. Five sizes from 12"×32" up to 28"×60", finished by hand in our US facility. 20 standard colors, each available in Low Gloss or High Gloss — 40 finish options total. Custom color matching available to any Pantone or RAL reference. PPM QuickShip in 1–2 weeks on standard finishes (sizes 12–24), backed by a 3-year limited warranty.

Browse related categories: Tall Planters · Round Planters · Indoor Planters · Outdoor Planters · Fiberglass Planters · Commercial Planters

• The vase silhouette in regular rotation for hospitality interiors, restaurant fronts, residential entries, and interior-designer projects across the US.
• Hand-laid commercial-grade fiberglass. UV-stable and frost-resistant. The 20"×43" Saint Tropez weighs about 29 lb empty — one person can place it; the larger 24" and 28" sizes are a two-person lift.
• Five sizes that scale cleanly, from a 12"×32" floor accent up to a 28"×60" lobby anchor that reads at distance.
• Custom color match available to any Pantone or RAL code. A small per-color fee covers the matching process plus any spray-out approvals, in either Low Gloss or High Gloss — your choice.
• Optional pre-drilled drainage holes at no extra cost. Pick "no drainage" for indoor use or "pre-drilled" for outdoor.
• Standard nursery grow pot fit: each Saint Tropez size accommodates a specific range of standard nursery containers (ANSI Z60.1) — useful for swap-in seasonal planting. See the size table below.
• Specification documentation: spec sheet PDF with dimensions, weights, and finish options. Expanded CAD and BIM files are in development.

Sizes & Pricing

Finished to order in our US facility. Commercial-grade build. 3-year limited warranty.

Soil capacity shown is conservative — rounded up so a buyer ordering by our number always has enough. It reflects ~90% of full interior volume to leave room for a drainage layer and ~1" below the rim. Note: potting soil settles 10–15% after watering — order a little extra if you intend to fill to the rim. Filled weights assume saturated potting soil at ~10 lb/gal for load planning; actual weights vary with media density, moisture, and root ball. Bottom Dia is the outside diameter at the base — useful for sizing tray protection or matching a stand. Grow pot fit follows ANSI Z60.1 nursery-stock standards; brand variance is typical — verify the specific container before order if it matters.

Ships in 1–2 weeks for sizes 12–24 in any of our 40 standard finishes and custom color matches. SKU 69626.28: inquire for lead time. Spray-out samples and custom shapes run longer; details are in the Design Guidance tab.

Prices shown are standard retail. (Trade accounts are available) They include any of our 20 standard colors in Low Gloss or High Gloss (40 finish options). Custom color matching is available with a small per-color fee that covers the full matching process, including physical spray-out samples for approval before production. The fee covers the color in both gloss levels. Pre-drilled drainage holes are free if you need them.

Materials & Construction

• Material: hand-laid commercial-grade fiberglass with a reinforced base. The 20"×43" Saint Tropez weighs about 29 lb empty; the 28"×60" weighs about 57 lb. An equivalent ceramic or concrete vase at that scale would run several times heavier and risk cracking. Fiberglass moves and places without equipment.
• Finish: multi-coat automotive-grade paint, hand-applied and clear-coated. UV-stable, frost-resistant, and rated for desert sun, coastal salt air, and freeze-thaw climates.
• Color range: 20 standard colors, each available in Low Gloss or High Gloss for 40 total finish options. Custom color matching to any Pantone or RAL code is available for a small per-color fee, covering both gloss levels. Works equally well for hotel brand standards, architectural specs, and matching residential trim. For brand colors held in other systems, convert to the nearest Pantone or RAL equivalent for the most accurate result.
• Construction: seamless one-piece body. No corner joints to fail, crack, or leak.
• Origin: a Jay Scotts silhouette, US-finished by Pots Planters & More. We stock the base inventory in our facility and finish each order to your color specification.
• Warranty: 3-year limited warranty against material and finish defects. Full warranty terms.

Tall Vase Fiberglass Planter for Lobbies, Entries, and Restaurant Fronts

Use the Saint Tropez as a tall vase planter for hotel lobbies, office reception areas, restaurant entries, and luxury residential entries where you want vertical presence without a heavy footprint. The gently tapered silhouette reads as sculpture rather than utility, which is why interior designers spec it in pairs to formalize an entry, in stepped trios to build a focal cluster, and as a single anchor in lobby corners. The five sizes (12"×32" through 28"×60") cover everything from a foyer accent to a double-height lobby piece, and because the body is one-piece commercial-grade fiberglass it weighs a fraction of an equivalent ceramic or concrete vase at the same scale. For outdoor courtyards, restaurant patios, and resort entries, see our full outdoor planter collection.

Project Planning Notes

• Filled weight (load planning): see the Filled (est.) column in the size table above. Estimates use saturated potting soil at ~10 lb/gal for conservative load planning; the 24"×50" lands near 530 lb filled and the 28"×60" near 876 lb. For rooftop terraces, elevated patios, and interior office floors, confirm load capacity with your structural engineer or building manager.
• Wind exposure (24" and 28" sizes): the tall vase profile catches wind in exposed installations. On rooftops, coastal patios, and exposed streetscape positions, the 24" and 28" benefit from added ballast — a layer of gravel or sand at the base, mass at planting, or anchoring per project conditions. The 12", 16", and 20" sizes are lower-risk in wind but should still be elevated and weighted on rooftops. Talk to our team if you need site-specific guidance.
• Drainage decision: indoor use is typically "no drainage" with a saucer or basin under the root ball. Outdoor use should be "pre-drilled" to prevent freeze damage and root rot. Both options are free; pick at order.
• Custom color workflow: send us your Pantone or RAL code. We mix the match and produce physical spray-out samples for your approval. Once approved, production begins. Add roughly one week to standard lead time for the spray-out and approval cycle. A small per-color fee applies and covers all spray-outs needed to lock the match — the fee covers both Low Gloss and High Gloss versions of that color. If your brand color lives in another system, convert to the nearest Pantone or RAL equivalent before submitting; cross-system conversions from house-paint references are typically only 80% accurate and add significant time to the approval cycle.
• Lead time caveats: standard finishes in sizes 12–24 ship in 1–2 weeks under our PPM QuickShip program. SKU 69626.28 — inquire for lead time. Custom Pantone or RAL color matches add about 1 week for the spray-out and approval cycle. Fully custom shapes and sizes are built to order on a project timeline we confirm with you at order. Bulk project orders (25+ units) ship on a confirmed schedule we set at order. We confirm exact dates in writing before you commit.

For Designers & Project Teams

The Saint Tropez is specified across hospitality, restaurant, office, and luxury residential projects. Because we finish every order in our US facility, lead times stay short and color flexibility stays open.

• US-stocked, finished to your color order. 1–2 weeks for sizes 12–24 in any standard finish under our PPM QuickShip program; add about 1 week for a custom Pantone or RAL color match. For the 28" size (69626.28), inquire for lead time.
• Color matching for branded environments. Match a hotel brand standard, restaurant interior palette, residential trim, or architectural specification using any Pantone or RAL code. A small per-color fee covers the match and spray-out approvals.
• Trade pricing for designers, architects, landscape professionals, and hospitality procurement teams across our full collection. Apply for a trade account.
• Specification documentation: Saint Tropez spec sheet PDF with dimensions, weights, planting openings, capacity, and finish options for project submittals. Expanded CAD and BIM files are in development.
• Freight delivery options: FedEx Freight Direct curbside (with liftgate and appointment) on $500+ orders, White Glove placement available, and orders over $3,500 include curbside shipping & handling at no additional cost. Full rate schedule is in the Shipping & Delivery tab.
• Returns: 30 days from delivery on standard-color items in original condition. Custom color match orders are made to your specification and aren't returnable. We confirm this in writing at time of quote so there are no surprises at delivery.
• Dedicated support: a project team from initial quote through delivery, not a contact form queue.

Trade Buyers Usually Ask

Colors may render differently on screen than in person. For final color decisions, request a physical sample.