St. Tropez Tall Vase Fiberglass Planter - Graceful Tapered Design for Classic and Modern Interiors

A tall vase-form planter that lifts an entry without giving up floor space, the round counterpart to the tapered square.

Hand-laid commercial-grade fiberglass, finished to order in our US finishing centers with our engineered six-stage finishing process, using professional 2K polyurethane, ASTM-rated for 1,000-hour salt spray and exterior UV durability.

• Five sizes, 12" diameter × 32" tall to 28" diameter × 60" tall. In regular rotation for hospitality interiors, restaurant fronts, residential entries, and corporate lobbies.
• Twenty standard colors in Low Gloss or High Gloss, plus custom Pantone or RAL match with physical spray-out approval before production.
• Ships in about a week off-peak. Plan two weeks during peak season (May through July). Custom color adds about a week for spray-out approval.
• No order minimum. Trade pricing available. 3-year limited warranty.
• Nationwide FedEx Freight Direct. COI and blind ship available. Project team confirms color, size, lead time, and freight in writing before you commit.

Browse related categories: Tall Planters · Round Planters · Indoor Planters · Outdoor Planters · Fiberglass Planters · Commercial Planters

• Specified by hospitality groups, restaurant chains, interior design firms, and luxury residential developments across the US. The vase silhouette in regular rotation for entries and lobbies.
• Hand-laid commercial-grade fiberglass. UV-stable and frost-resistant. Holding up in desert sun, coastal salt air, and freeze-thaw climates for decades, not seasons.
• Five sizes to mix and match, from a 12"×32" floor accent up to a 28"×60" lobby anchor that reads at distance.
• Custom color match available to any Pantone or RAL code. $100 per-color fee covers the matching process plus all spray-out approvals, in either Low Gloss or High Gloss, your choice.
• Optional pre-drilled drainage holes at no extra cost. Pick "no drainage" for indoor use or "pre-drilled" for outdoor.
• Standard nursery grow pot fit: the tapered round interior accommodates a single standard nursery grow pot sized to the bottom dimension, useful for swap-in seasonal planting and commercial maintenance rotations. See the size table below.
• Specification documentation: spec sheet PDF with dimensions, weights, planting openings, capacity, and finish options for project submittals.

Sizes & Pricing

Finished to order in our US finishing centers. Commercial-grade build. 3-year limited warranty.

Soil capacity shown is the full interior volume from the factory specification. Plan for ~85 to 90% fill to leave room for a drainage layer at the base and ~1" of clearance below the rim. For the 24"×50", that works out to roughly 17 to 18 cu ft of soil rather than the full 19.6. Note: potting soil settles 10 to 15% after the first watering. If you plan to top off to the rim after settling, order a small margin extra. Filled weights assume saturated potting soil at ~74.8 lb/cu ft and ~90% fill for conservative load planning; actual weights vary with media density, moisture, and root ball. Bottom Dia is the outside diameter at the base, useful for sizing tray protection, stand placement, or planning narrow base clearance on stepped landings. Grow pot fit shows the nominal nursery-pot diameter that fits the planter's interior bottom, the binding constraint on a tapered form. Brand variance is typical, so verify the specific container before order if it matters.

Ships in about a week off-peak. Plan two weeks during peak season (May through July). Custom Pantone or RAL color matches add about a week for spray-out approval. Spray-out samples and custom shapes run longer; details are in the Design Guidance tab.

Prices shown are standard retail. (Trade accounts are available) They include any of our 20 standard colors in Low Gloss or High Gloss (40 finish options). Custom color matching is available for a $100 per-color fee that covers the full matching process, including physical spray-out samples for approval before production. The fee covers the color in both gloss levels. Pre-drilled drainage holes are free if you need them.

Materials & Construction

• Material: hand-laid commercial-grade fiberglass with a reinforced base. The 28"×60" Saint Tropez weighs about 57 lb empty. An equivalent ceramic or concrete vase at the same scale would run several times heavier and risk cracking, so two people can move and place a Saint Tropez without equipment.
• Finish system: our engineered six-stage finishing process. We pull pre-manufactured inventory, re-inspect each planter, repair any cosmetic defects, abrade the surface for durable adhesion, apply a professional automotive-grade 2K polyurethane, and cure to shipping hardness before crating. The chemistry is ASTM-rated for 1,000-hour salt spray (ASTM B117), 1,000-hour humidity resistance (ASTM D2247), and exterior UV durability.
• Color range: 20 standard colors, each available in Low Gloss or High Gloss for 40 total finish options. Custom color matching to any Pantone or RAL code is available for a $100 per-color fee, covering both gloss levels. Works equally well for hotel brand standards, architectural specs, and matching residential trim. For brand colors held in other systems, convert to the nearest Pantone or RAL equivalent for the most accurate result.
• Construction: seamless one-piece body. No corner joints to fail, crack, or leak.
• Origin: a Jay Scotts silhouette, US-finished by Pots Planters & More. We stock the base inventory in our facilities and finish each order to your color specification.
• Warranty: 3-year limited warranty against material and finish defects. Full warranty terms.

Tall Vase Fiberglass Planter for Lobbies, Entries, and Restaurant Fronts

The Saint Tropez is a tall, tapered round indoor or outdoor fiberglass planter built for hotel lobbies, office reception areas, restaurant entries, and luxury residential entries. The five sizes step from a 12"×32" foyer accent up to a 28"×60" lobby anchor, so a single product line covers everything from reception-desk flanking pairs to double-height lobby focal points. The defining detail is the silhouette: a sculpted curved foot at the base resolving into a tall, near-straight upper body. It rises as a true vertical without reading as utility infrastructure. The seamless one-piece commercial-grade fiberglass body weighs a fraction of an equivalent ceramic or concrete vase at the same scale. Designers commonly spec the 16"×38" and 20"×43" for reception areas and residential entries, the 24"×50" for restaurant fronts and lobby focal points, and the 28"×60" for grand lobby and double-height interior statements.

Project Planning Notes

• Filled weight (load planning): see the Filled (est.) column in the size table above. Estimates use saturated potting soil at ~74.8 lb/cu ft and ~90% fill for conservative load planning. The 24"×50" lands near 1,320 lb filled and the 28"×60" near 2,105 lb. For rooftop terraces, elevated patios, and interior office floors, confirm load capacity with your structural engineer or building manager. The 20"×43" and larger Saint Tropez sizes all exceed 800 lb filled and are common points where structural load review is appropriate.
• Wind exposure (50" and 60" sizes): the tall vase profile catches wind. In rooftop, coastal, or exposed streetscape installations, the 24"×50" and 28"×60" sizes benefit from added ballast: a layer of gravel or sand at the base, mass at planting, or anchoring per project conditions. The narrow footprint at the base is part of the silhouette but means weighting matters more than on a wider planter. Talk to our team if you need site-specific guidance.
• Base footprint and placement: the tapered form has a smaller bottom than top. See the Bottom Dia column in the size table for the actual base diameter, useful for sizing protective trays, planning stepped landings, or confirming clearance against railings, planters, and stair edges.
• Drainage decision: indoor use is typically "no drainage" with a saucer or basin under the root ball. Outdoor use should be "pre-drilled" to prevent freeze damage and root rot. Both options are free; pick at order.
• Custom color workflow: send us your Pantone or RAL code. We mix the match and produce physical spray-out samples for your approval. Once approved, production begins. Add about a week to standard lead time for the spray-out and approval cycle. A $100 per-color fee applies and covers all spray-outs needed to lock the match. The fee covers both Low Gloss and High Gloss versions of that color. If your brand color lives in another system, convert to the nearest Pantone or RAL equivalent before submitting; cross-system conversions from house-paint references are typically only 80% accurate and add significant time to the approval cycle.
• Lead time caveats: standard finishes ship in about a week off-peak. Plan two weeks during peak season (May through July). Custom Pantone or RAL color matches add about a week for the spray-out and approval cycle. Fully custom shapes and sizes are built to order on a project timeline we confirm with you at order. Bulk project orders (25+ units) ship on a confirmed schedule we set at order. We confirm exact dates in writing before you commit.
• Multi-unit finish consistency: for runs of 4+ units, request finish-consistency confirmation before production. Single-batch production keeps color, sheen, and texture matched across the order.

For Designers & Project Teams

The Saint Tropez is in regular rotation for hospitality, restaurant, office, and luxury residential projects across the country. Because we finish every order in our US facilities, lead times stay short and color flexibility stays open.

• US-stocked, finished to your color order. About a week off-peak for any standard finish; plan two weeks during peak season (May through July). Add about a week for a custom Pantone or RAL color match.
• Color matching for branded environments. Match a hotel brand standard, restaurant interior palette, or architectural specification using any Pantone or RAL code. A $100 per-color fee covers the match and spray-out approvals.
• Trade pricing for designers, architects, landscape professionals, and hospitality procurement teams across our full collection. Apply for a trade account.
• Specification documentation: Saint Tropez spec sheet PDF with dimensions, weights, planting openings, capacity, and finish options for project submittals.
• Freight delivery options: FedEx Freight Direct curbside (with liftgate and appointment) on $500+ orders, White Glove placement available, and orders over $3,500 include curbside shipping & handling at no additional cost. Full rate schedule is in the Shipping & Delivery tab.
• Returns: 30-day returns on standard finishes. No returns on custom-color, textured finishes or custom-size orders. We confirm this in writing at time of quote so there are no surprises at delivery.
• Dedicated support: a project team from initial quote through delivery, not a contact form queue.

Trade Buyers Usually Ask

Colors may render differently on screen than in person. For final color decisions, request a physical sample. Recommended for commercial multi-unit orders.